Filter
Top Products
www.kodak.com/go/aiosupport 5
Kodak ESP 9 All-in-One printer
Support for connecting digital memory devices to the printer
Your All-in-One printer allows you to connect both digital camera memory cards and
USB-connected devices for previewing and printing. You can also transfer photos
and document files to your connected computer.
CAUTION:
Connect only one external memory device to your printer at a time. If both
memory card slots, or any memory card slot and the host USB port, have a
device connected to them simultaneously, the printer cannot access the
photos or documents contained on any of them. If your printer cannot
recognize a device you have connected to it, make sure that only one device is
connected at a time.
Memory card slots
Although this All-in-One printer has two card slots, insert and use only one memory
card at a time.
A blue light, located above the memory card slots, blinks while the card is being
accessed and stays lit while the card remains in the slot and the printer is on.
Memory cards supported
The Kodak ESP 9 All-in-One printer supports the following memory cards, used in
most digital cameras:
–
XD xD-Picture Card
–
MS Memory Stick, Memory Stick Pro and Magic Gate
–
SD Secure Digital Card, Multi-Media Card
–
CF Compact Flash type I and type II, including micro drives
–
SDHC Secure Digital High Capacity cards.
WARNING: Do NOT remove the memory card while the light blinks, or you
may damage the card.