Filter
Top Products
www.kodak.com/go/aiosupport 43
Kodak ESP 9 All-in-One printer
a
Some phone system features may not be available with pulse dialing, which is
slower than tone dialing. Contact your telephone company if you are unsure about
which setting to use.
b
When the Error Correction mode is enabled, the printer detects errors during
transmission. Using this feature, the All-in-One printer will automatically
re-transmit the fax. Although the Error Correction mode increases send time on poor
phone lines, the fax is transmitted much more reliably.
NOTE: Error Correction is only applied to black-and-white faxes sent from the
All-in-One printer. This feature does not affect the reliable transmission of
faxes being received.
1. From the control panel, press
Menu.
2. Press until
Fax Settings is selected, and then press OK.
3. Press until the option you want to configure is selected, and then press
OK.
4. As needed, press or to set the desired sub-setting, as in configuring your
sender name and telephone numbers.
5. As needed, press or to change the setting.
6. Press
OK to save the setting(s).