Filter
Top Products
Scanning
64 www.kodak.com/go/aiosupport
All-in-One printer can detect multiple photos placed on the scanner glass. Allow
some space on the scanner glass between each item, and use the Home Center
software to save each photo as a separate file. Any images on the scanner glass that
overlap are interpreted by the software as a single image file.
CAUTION:
Home Center cannot interpret two or more documents, photos, or a
combination of documents and photos, as separate scanned items when the
Scan What option is set to Document.
Adjusting scan settings
You can change the default scan settings for your printer using the control panel.
When you change scan settings from the control panel, the settings apply only to
the current scan job. To apply scan settings to all future scan jobs, you can save your
changes.
1. From the control panel, press
Menu.
2. Press until
Scan is selected.
3. Press
OK to display the Scan Options menu. A sample of the menu is shown in
the illustration below.
4. Here you can press until the option you want to adjust is selected. If a value
is displayed between the and symbols in the row, press or to select
the value you want.
5. Any changes you make to the scan settings apply only to the current scan
operation. To keep the settings as permanent, press until
Save as Defaults is
selected, and then press
OK.
6. Press
Start to initiate the scan.
The available scan settings are in the following table: