Filter
Top Products
Faxing
68 www.kodak.com/go/aiosupport
The Fax phone number of the selected entry displays in the menu header,
replacing any previous number. See the illustration below.
5. Press
Start to send the fax.
Using quick dial to select a fax phonebook entry
By assigning up to ten contacts in your Fax Phonebook with a number between 0
(zero) and 9, the Quick Dial feature in your ESP 9 All-in-One printer allows you to
create shortcuts for quickly sending Faxes to them
NOTE: To configure a fax recipient as a Quick Dial entry, review Fax Phonebook
entries, page 71.
There are two ways to use the Quick Dial feature for sending faxes.
Specifying a quick dial recipient from the keypad
1. Load the original. As appropriate, review Preparing a fax for transmission,
page 72.
2. From the control panel, press
Menu.
3. Press to select
Send Fax and then press OK.
4. Select the appropriate key on the control panel’s keypad associated with the
Quick Dial entry, and then press
Start. For example, press 8 to specify the entry
assigned the Quick Dial value of “08.” See the illustration below.