Filter
Top Products
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to
determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
System-error log message Action
OS Watchdog response enabled by x Information only.
PFA Alert, see preceding error in system error
log
Information only. See the preceding entry in the system-error log.
Possible ASM reset occurred -- reason unknown Information only.
Power off Information only.
Power on Information only.
PPP[xxx] PPP-Cfg, Local-
IP@=aaa.aaa.aaa.aaa, Remote-
IP@=bbb.bbb.bbb.bbb NetMsk=ccc.ccc.ccc.ccc,
Auth=ddd
Information only.
PPP_1:Client Connected at xxx bps Information only.
PPP_1:User requested to abort PPP interface Information only.
Received alert from system x; type:y, sender’s
ID:z
Information only.
Remote access attempt failed Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from WEB
browser at IP@=yyy.yyy.yyy.yyy
Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from TELNET
client at IP@=yyy.yyy.yyy.yyy
Information only.
Remote Login Successful. Login ID: Information only.
Remote Login Successful. Login ID:’x’ from
CMD mode client at IP@=yyy.yyy.yyy.yyy
Information only.
Retried alert accepted from system x; type:y,
sender’s ID:z
Information only.
Retry count exceeded. Incorrect password
entered too many times for userid w, x, y, z
Information only.
RS485 broadcast from x ignored; more than y
devices present on the RS485 network
Information only.
RS485 connection to system x has ended Information only.
RS485 network overload has cleared; x or fewer
devices are present on the RS485 network
Information only.
RSA x Became the ISMP Gateway Information only.
Running the backup ASM main application Information only.
Secondary Device Event[00 x UNKNOWN-y] Information only.
Sending alert to remote system x; type:y, ID:z Information only.
208 ThinkServer TD100 and TD100x: Hardware Maintenance Manual