Filter
Top Products
CLI Commands
show
2
2-71
VKRZORJLQ6HUYHU
6\QWD[ loginServer
3XUSRVH This command displays information from the login server database
for devices attached to this switch. Note that it is possible to have
more than one device per port for any public loop devices attached to
an FL Port.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> show loginServer
2XWSXW The device information is displayed as a table that includes the
following properties.
2XWSXW([DPSOH The output from the show.loginServer command displays as follows.
Port BB Crdt RxFldSz COS Port Name Node Name
---- ------- ------- --- ----------------------- -----------------------
0 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
1 10 2 00:11:22:33:44:55:00:78 20:11:22:33:44:55:66:78
4 10 2,3 00:11:22:33:44:55:00:79 20:11:22:33:44:55:66:79
7 10 2,3 00:11:22:33:44:55:00:80 20:11:22:33:44:55:66:80
8 10 2 00:11:22:33:44:55:00:81 20:11:22:33:44:55:66:81
10 10 2,3 00:11:22:33:44:55:00:82 20:11:22:33:44:55:66:82
11 10 2,3 00:11:22:33:44:55:00:83 20:11:22:33:44:55:66:83
12 10 3 00:11:22:33:44:55:00:84 20:11:22:33:44:55:66:84
13 10 2,3 00:11:22:33:44:55:00:85 20:11:22:33:44:55:66:85
15 10 2,3 00:11:22:33:44:55:00:86 20:11:22:33:44:55:66:86
Port The port number where the device is attached.
BB Crdt The maximum number of remaining frames
that can be transmitted without causing a buffer
overrun condition at the receiver.
RxFldSz The buffer-to-buffer receive data field size from
the FLOGI received from the attached N_Port.
COS The class of service (for example, 1; 2; 3; 4; 5; 6;
F; 1,2; 2,3).
Port Name The port WWN of the attached device.
Node Name The node WWN of the attached device.