McDATA OPENconnectors Command Line Interace Network Card User Manual


 
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-34
FRQILJVZLWFKLQWHURS0RGH
6\QWD[ interopMode interopMode
3XUSRVH This command sets the interoperability mode for the switch. The
switch must be offline to complete this command.
'HVFULSWLRQ The switch must be set offline before this command is entered.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config switch interopMode open
FRQILJVZLWFKSUHI'RPDLQ,G
6\QWD[ prefDomainId domainId
3XUSRVH This command sets the preferred domain ID for the switch. The
switch must be offline to complete this command.
'HVFULSWLRQ The switch must be set offline before this command is entered.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config switch prefDomainId 1
interopMode Specifies the interoperability mode. Valid
values are mcdata and open:
mcdata McDATA Fabric 1.0
open Open Fabric 1.0
domainId Specifies the new preferred domain ID value.
This parameter must be an integer in the range
131.