Filter
Top Products
CLI Commands
config
2
2-13
FRQILJSRUWVKRZ
6\QWD[ show portNumber
3XUSRVH This command displays the port configuration for a single port.
'HVFULSWLRQ This show command, on the config.port branch, displays the current
configuration for the specified port.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config port show 4
2XWSXW The port configuration is displayed as a table that includes the
following properties.
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port Number The port number.
Name The port name.
Blocked The blocked state. Valid values are true and
false.
Extended
Distance
The extended distance configuration state. Valid
values are true and false. (This field is not valid
on the Sphereon 4500.)
FAN The fabric address notification (FAN) state.
Valid values are true and false. (Sphereon 4500
only.)