McDATA OPENconnectors Command Line Interace Network Card User Manual


 
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-54
FRQILJ]RQLQJVKRZ$FWLYH
6\QWD[ showActive
3XUSRVH This command shows the zoning configuration saved on the fabric.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> config zoning showActive
2XWSXW The zoning configuration data is displayed as a table that includes
the following properties.
2XWSXW([DPSOH The output from the config.zoning.showActive command displays as
follows.
Active Zone Set
Default Zone Enabled: False
ZoneSet: TheUltimateZoneSet
Zone: TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone: TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
Active ZoneSet The enabled status, name, and member zones of
the zone set.