Filter
Top Products
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-84
VKRZVHFXULW\SRUW%LQGLQJ
6\QWD[ portBinding
3XUSRVH This command shows the port binding configuration for all ports.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> show security portBinding
2XWSXW The port binding configuration data is displayed as a table that
includes the following properties.
2XWSXW([DPSOH The output from the show.security.portBinding command displays as
follows.
Port WWN Binding Bound WWN
---- ----------- -----------------------
0 Active AA:00:AA:00:AA:00:AA:00
1 Inactive 00:00:00:00:00:00:00:00
2 Inactive CC:33:44:55:CC:33:44:55
3 Active 00:00:00:00:00:00:00:00
4 Inactive 00:00:00:00:00:00:00:00
5 Inactive 00:00:00:00:00:00:00:00
6 Inactive 00:00:00:00:00:00:00:00
7 Inactive 00:00:00:00:00:00:00:00
8 Inactive 00:00:00:00:00:00:00:00
9 Inactive 00:00:00:00:00:00:00:00
10 Inactive 00:00:00:00:00:00:00:00
11 Inactive 00:00:00:00:00:00:00:00
12 Inactive 00:00:00:00:00:00:00:00
13 Inactive 00:00:00:00:00:00:00:00
14 Inactive 00:00:00:00:00:00:00:00
15 Inactive 00:00:00:00:00:00:00:00
Port The port number.
WWN Binding The state of port binding for the specified port
(active or inactive).
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device is
bound to the specified port.