Filter
Top Products
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-8
FRQILJSRUWH[W'LVW
6\QWD[ extDist portNumber extDistOn
3XUSRVH This command sets the extended distance state for a port. (The
Sphereon 4500 does not accept this command.)
'HVFULSWLRQ When the extended distance field is true, the port is configured for 60
buffer credits, which supports a distance of up to 100 km for a
1 gigabits per second (Gbps) port.
3DUDPHWHUV This command has two required parameters.
&RPPDQG([DPSOHV Root> config port extDist 4 false
Root> config port extDist 4 0
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
extDistOn Specifies the extended distance state for the
port. Valid values are true and false. Boolean 1
and 0 may be substituted as values.