Filter
Top Products
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-88
VKRZV\VWHP
6\QWD[ system
3XUSRVH This command displays a set of system attributes.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> show system
2XWSXW The system attributes are displayed as a table that includes the
following properties.
Name The system name as set in the
config.system.name command.
Description The system description as set in the
config.system.description command.
Contact The system contact as set in the
config.system.contact command.
Location The system description as set in the
config.system.description command.
Date/Time The system date and time as set in the
config.system.date command.
Serial Number The serial number for the system.
Type Number The type number for the system.
Model Number The model number for the system (for example,
Intrepid 6064).
EC Level The engineering change level installed.
Firmware
Ver sion
The current firmware version installed.
Beaconing The enabled state of unit beaconing (enabled or
disabled) as set in the maint.system.beacon
command.