Filter
Top Products
CLI Commands
config
2
2-33
FRQILJVZLWFKLQVLVW'RPDLQ,G
6\QWD[ insistDomainId insistentDomainIdState
3XUSRVH This command sets the insistent domain ID state for the switch.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config switch insistDomainId 1
FRQILJVZLWFKHG729
6\QWD[ edTOV timeoutValue
3XUSRVH This command sets the E_D_TOV for the switch.
'HVFULSWLRQ The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its
relationship with R_A_TOV.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config switch edTOV 4
insistentDomainIdState Specifies whether the insistent domain ID
state is enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted
as values.
timeoutValue Specifies the new E_D_TOV value. The units for
this value are tenths of a second. This parameter
must be an integer in the range 2–600
(0.2 second to 60 seconds), and it must be
smaller than the R_A_TOV.