Filter
Top Products
A
Error Messages
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
A-10
Message Error 74: Invalid Number of Zones
Description The specified zone set contains less than one zone or more than the
maximum number of zones allowed for this product.
Action A zone set must contain at least one zone to be considered valid. Add
or remove zones accordingly to meet specified requirements.
Message Error 75: Invalid Zone Set Size
Description The zone set entered exceeds switch NVRAM limitations.
Action Reduce the size of the zone set to meet specified requirements. This
can be a reduction in the number of zones in the zone set, a reduction
of members in a zone, or a reduction of zone name lengths.
Message Error 76: Invalid Number of Unique Zone Members
Description The zone entered contains more than the maximum number of zone
members allowed per zone set for this product.
Action Reduce the number of members in one or more zones and re-submit
the command.
Message Error 77: Not Allowed While Port Is Failed
Description The port selected is in a failed or inactive state, or is in need of
service.
Action Consult the installation/service manual for appropriate action.
Message Error 78: System Error Light On
Description This unit is not able to beacon because the system error light is on.
Action You must clear the system error light before unit beaconing may be
enabled. Consult the installation/service manual for appropriate
action.