Filter
Top Products
A
Error Messages
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
A-24
Message Error 228: Invalid Write Authorization Argument
Description The writeAuthorization parameter does not contain a valid value.
Action Parameters must be typed exactly to specification to be recognized
correctly by the CLI. For more information, see
config.snmp.addCommunity on page 2-29.
Message Error 229: Invalid UDP Port Number
Description The udpPortNum parameter does not contain a valid value.
Action Parameters must be typed exactly to specification to be recognized
correctly by the CLI. For more information, see
config.switch.insistDomainId on page 2-33.
Message Error 230: Invalid WWN
Description The wwn parameter does not contain a valid value.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 231: Invalid Port number
Description The portNum parameter does not contain a valid value.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 232: Invalid Domain ID
Description The domainID parameter does not contain a valid value.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.