Filter
Top Products
CLI Commands
show
2
2-73
2XWSXW([DPSOH The output from the show.nameServer command displays as follows.
Type Port Id Port Name Node Name COS FC4 Types
---- ------- ----------------------- ----------------------- --- ---------
N 010400 00:11:22:33:44:55:66:77 20:11:22:33:44:55:66:77 2,3 2
N 010500 00:11:22:33:44:55:66:78 20:11:22:33:44:55:66:78 2,3 0
N 010600 00:11:22:33:44:55:66:79 20:11:22:33:44:55:66:79 2,3 2
N 010700 00:11:22:33:44:55:66:80 20:11:22:33:44:55:66:80 2 2
N 010800 00:11:22:33:44:55:66:81 20:11:22:33:44:55:66:81 3 2
N 010900 00:11:22:33:44:55:66:82 20:11:22:33:44:55:66:82 3 2
N 010C00 00:11:22:33:44:55:66:83 20:11:22:33:44:55:66:83 2,3 2
N 010D00 00:11:22:33:44:55:66:84 20:11:22:33:44:55:66:84 2,3 2
N 010E00 00:11:22:33:44:55:66:85 20:11:22:33:44:55:66:85 2 5
N 010F00 00:11:22:33:44:55:66:86 20:11:22:33:44:55:66:86 2 4
N 011200 00:11:22:33:44:55:66:87 20:11:22:33:44:55:66:87 2,3 2
N 011300 00:11:22:33:44:55:66:88 10:11:22:33:44:55:66:88 2,3 2
FC4 Types
0: ISO/IEC 8802-2 LLC
1: ISO/IEC 8802-2 LLC/SNAP
2: SCSI-FCP
3: SCSI-GPP
4: IPI-3 Master
5: IPI-3 Slave
6: IPI-3 Peer
7: CP IPI-3 Master
8: CP IPI-3 Slave
9: CP IPI-3 Peer
10: SBCCS-Channel
11: SBCCS-Control Unit
12: FC-SB-2 Channel to Control Unit
13: FC-SB-2 Control Unit to Channel
14: Fibre Channel Service
15: FC-FG
16: FC-SW
17: FC-AL
18: SNMP
19: HIPPI-FP
20: Vendor Unique
VKRZQDPH6HUYHU([W
6\QWD[ nameServerExt
3XUSRVH This command displays extended information from the name server
database for devices attached to this switch. The command provides
Symbolic Nameserver information, as well as the same information
as the show.nameServer command. Multiple devices per port are
possible for any public loop device attached to an FL Port.
Because it contains symbolic nameserver information that can be lengthy, the
CLI output wraps several times per node. For this reason, this command is
supported only in comma-delimited mode.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> show nameServerExt