Filter
Top Products
CLI Commands
config
2
2-7
2XWSXW The LAN configuration data is displayed as a table that includes the
following properties.
2XWSXW([DPSOH The output from the config.ip.show command displays as follows.
IP Address: 10.0.0.0
Gateway Address: 0.0.0.0
Subnet Mask: 255.0.0.0
FRQILJSRUWEORFNHG
6\QWD[ blocked portNumber blockedState
3XUSRVH This command sets the blocked state for a port.
3DUDPHWHUV This command has two required parameters.
&RPPDQG([DPSOHV Root> config port blocked 4 false
Root> config port blocked 4 0
IP Address The IP address.
Gateway
Address
The gateway address.
Subnet Mask The subnet mask.
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
blockedState Specifies the blocked state for the port. Valid
values are true and false. Boolean 1 and 0 may be
substituted as values.