McDATA OPENconnectors Command Line Interace Network Card User Manual


 
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-24
config.security.switchBinding.setState
6\QWD[ setState switchBindingState
3XUSRVH This command sets the switch binding state on the switch.
3DUDPHWHUV This command has one parameter:
Root> config security switchBinding setState allRestrict
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable - Disable switch binding. Devices
(servers, storage, and other switches) are
allowed to connect to the switch without
restrictions.
eRestrict - Enable switch binding and restrict
E_Port connections. E_Ports are prevented
from forming ISL connections unless
explicitly identified in the switch
membership list. F_Port connections are
allowed without restriction.
fRestrict - Enable switch binding and restrict
F_Port connections. Server and (or) storage
devices are prevented from forming F_Port
connections with the switch unless explicitly
identified in the switch membership list.
E_Ports are allowed to form ISL connections
without restriction.
allRestrict - Enable switch binding and
restrict E_Port and F_Port connections. Both
E_Ports and F_Ports prohibit connections
with all devices unless explicitly identified
in the switch membership list.