McDATA OPENconnectors Command Line Interace Network Card User Manual


 
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-64
SHUIOLQN
6\QWD[ link portNumber
3XUSRVH This command displays port link counters for a single port.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> perf link 2
2XWSXW The port link counter data is displayed as a table that includes the
following statistics.
portNumber
Specifies the port number. Valid values are:
015 for the Sphereon 3016 and 3216
023 for the Sphereon 4500
031 for the Sphereon 3032 and 3232
063 for the Intrepid 6064
0127 and 132144 for the Intrepid 6140
Port The port number.
OLS In The number of offline sequences initiated by the
attached N_Port.
OLS Out The number of offline sequences initiated by
this director or switch port.
Reset In The number of link resets initiated by the
attached N_Port.
Reset Out The number of link resets initiated by this
director or switch.
LIPS In The number of Loop Initialization Primitives
(LIPS) detected on this switch loop port.
LIPS Out The number of LIPS generated on this switch
loop port.
Link Flrs The number of times the port has detected a
link error resulting from an invalid link state
transition or timeout.