McDATA OPENconnectors Command Line Interace Network Card User Manual


 
CLI Commands
config
2
2-49
FRQILJ]RQLQJDGG3RUW0HP
6\QWD[ addPortMem zoneName domainId portNumber
3XUSRVH This command adds the domain ID and port number of a zone
member to the specified zone in the work area.
Port numbers cannot be used for zone members if the interoperability mode
for the switch or director is set to Open Fabric 1.0 mode.
'HVFULSWLRQ The CLI supports the number of zones members per zone specified
for a given product.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config zoning addPortMem TheUltimateZone 10 6
zoneName
Specifies the name of the zone.
domainId
Specifies the domain ID of the member to be
added to the zone. Valid values are in the range
131.
portNumber
Specifies the port number of the member to be
added to the zone. Valid port number values are:
015 for the Sphereon 3016 and 3216
023 for the Sphereon 4500
031 for the Sphereon 3032 and 3232
031 for the ED-5000
063 for the Intrepid 6064
0127 and 132144 for the Intrepid 6140