McDATA OPENconnectors Command Line Interace Network Card User Manual


 
Error Messages
Error Messages
A
A-15
Message Error 134: Invalid Membership List
Description Generic message to indicate a problem in either the switch binding or
fabric binding membership list.
Action Be sure that the membership list submitted does not isolate a switch
already in the fabric. If this is not the case, the user needs to be aware
of all fabric security rules and make sure that the list submitted
adheres appropriately.
Message Error 135: Invalid Number of Fabric Membership List Entries
Description The number of fabric members submitted exceeds the maximum
allowable entries of 31.
Action The number of entries in the fabric membership list is limited to the
total number of domain IDs available to the fabric. Make sure that
the list (including the managed switch) contains no more than 31
entries.
Message Error 136: Invalid Number of Switch Membership List Entries
Description The number of switch members submitted exceeds the maximum
allowable entries of 256.
Action The number of entries in the switch membership list is limited to 256.
Make sure that the list (including the managed switch) contains no
more than 256 entries.
Message Error 137: Invalid Fabric Binding State
Description The fabric binding state submitted is not recognized by the CLI.
Action The fabric binding state must be set to either inactive or restrict. For
more information, see config.security.fabricBinding on page 2-14.