McDATA OPENconnectors Command Line Interace Network Card User Manual


 
CLI Commands
config
2
2-45
FRQILJ]RQLQJDFWLYDWH=RQH6HW
6\QWD[ activateZoneSet
3XUSRVH This command activates the zone set contained in the work area to
the fabric and takes effect immediately.
'HVFULSWLRQ This command takes effect immediately in the fabric.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> config zoning activateZoneSet
If the interoperability mode for the switch or director is set to Open Fabric 1.0
mode when the zone is activated, any zone members specified by port
number are ignored.
FRQILJ]RQLQJGHDFWLYDWH=RQH6HW
6\QWD[ deactivateZoneSet
3XUSRVH This command places all attached devices in the default zone and
takes effect immediately fabric wide.
'HVFULSWLRQ The default zone must be activated independently of this command.
This command takes effect immediately in the fabric.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> config zoning deactiveZoneSet