Filter
Top Products
1
Introduction
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
1-16
&RPPHQWLQJ6FULSWV
The pound sign (#) can be used to add comments in a script file. The
pound sign must be the first character in the line; the CLI ignores
everything after the pound sign in that line. The following lines are
valid:
Root> #Change port 3 to an E_Port<CR>
Root> config port<CR>
config.port> ##################<CR>
config.port> ## Begin Script ##<CR>
config.port> ##################<CR>
The pound sign cannot be used after any other characters (a
command, for example) to start a comment. The following is an
invalid script line:
Root> maint system beacon true # Turn on beaconing<CR>
To correct the previous script line, move the comment either before or
after the line with the command. For example, the following
examples are both valid:
Root> # Turn on beaconing<CR>
Root> maint system beacon true<CR>
Root> maint system beacon true<CR>
Root> # Turn on beaconing<CR>
Comments of over 200 characters in length may cause unpredictable system
behavior. Limit comments to 200 characters per line.