McDATA OPENconnectors Command Line Interace Network Card User Manual


 
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-22
&RPPDQG([DPSOHV Root> config security portBinding wwn 4
AA:99:23:23:08:14:88:C1
Root> config security portBinding wwn 4 attached
Root> config security portBinding wwn 4 remove
config.security.portBinding.show
6\QWD[ show portNumber
3XUSRVH This command shows the port binding configuration for a single
port.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config security portBinding show 4
2XWSXW The port binding configuration date is displayed as a table that
includes the following properties.
2XWSXW([DPSOH The output from the config.security.portBinding.show command
displays as follows.
Port Number: 4
WWN Binding: Active
Bound WWN: AA:99:23:23:08:14:88:C1
portNumber Specifies the port number for which the port
binding configuration will be shown. Valid
values are:
015 for the Sphereon 3016 and 3216
023 for the Sphereon 4500
031 for the Sphereon 3032 and 3232
063 for the Intrepid 6064
0127 and 132144 for the Intrepid 6140
Port Number The port number.
WWN Binding The state of port binding for the specified port,
either active or inactive.
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device
has been bound to the specified port.