Filter
Top Products
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-74
2XWSXW The device information data is displayed as a table that includes the
following properties.
2XWSXW([DPSOH The output from the show.nameServerExt command displays as
follows.
Type, Port Id, Port Name, Node Name, COS, FC4 Types,
SymNodeName, SymPortName,
N, 010400, 00:11:22:33:44:55:00:77,
20:11:22:33:44:55:66:77, 2-3, 2, Node Name A, Port
Name A,
N, 010500, 00:11:22:33:44:55:01:77,
20:11:22:33:44:55:66:77, 2-3, 0, This Is Symbolic Node
Name B, Symbolic Port Name B Is Slightly Longer
N, 010600, 00:11:22:33:44:55:66:02,
20:11:22:33:44:55:66:77, 2-3, 2, , ,
FL, 000001, 00:11:22:33:44:55:66:03,
20:11:22:33:44:55:66:77, 2, 0, Loop Node 1, Loop Port
7
FL, 000002, 00:11:22:33:44:55:66:04
20:11:22:33:44:55:66:77, 3, 2, Loop Node 2, Loop Port
7,
Type The type (N, NL, F/NL, F, FL, E, B).
Port Id The 24-bit Fibre Channel address.
Port Name The port WWN of the attached device.
Node Name The node WWN of the attached device.
COS The class of service (for example, 1; 2; 3; 4; 5; 6;
F; 1,2; 2,3).
FC4 Types The FC4 types registered for this device. One or
more numbers display in this field. The
numbers in this field correspond to the list in
the output example for show.nameServer on
page 2-72.
SymNodeName 255-character representation of the Symbolic
Node Name.
SymPortName 255-character representation of the Symbolic
Port Name.