McDATA OPENconnectors Command Line Interace Network Card User Manual


 
A
Error Messages
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
A-22
Message Error 215: Zone Set Size Exceeded
Description The local work area zone set has outgrown the size limitations
imposed by the Command Line Interface.
Action Reduce the size of the zone set to meet CLI requirements. This can be
a reduction in the number of zones in the zone set, a reduction of
members in a zone, or a reduction of zone name lengths.
Message Error 218: Invalid Port Number
Description The value entered for the port number is invalid
Action Enter a port number within the range supported by your director or
switch. Valid values are:
015 for the Sphereon 3016 and Sphereon 3216
0-23 for the Sphereon 4500
031 for the Sphereon 3032 and Sphereon 3232
031 for the ED-5000
063 for the Intrepid 6064
0127 and 132144 for the Intrepid 6140
Message Error 219: Invalid Port Type
Description The port type configured is invalid.
Action A port may be configured to be an eport, gport, or fport. Be sure the
port is configured appropriately and re-submit the command. On the
Sphereon 4500 only, fxport and gxport types are also supported.
Message Error 222: Invalid SNMP Community Index
Description The value entered for the SNMP community index is invalid.
Action The SNMP community index must be an integer in the range 16.
Make the appropriate changes and re-submit the command.