Filter
Top Products
2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-4
FRQILJIHDWXUHVLQVWDOO.H\
6\QWD[ installKey featureKey
3XUSRVH This command allows the user to install a feature set that is enabled
by the provided feature key. The switch can be either offline or online
when this command is executed.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config features installKey AaBb-CCdD-eeFF-gH
FRQILJIHDWXUHV2SHQ6\V06
6\QWD[ OpenSysMS osmsState
3XUSRVH This command sets the enabled state of the Open Systems
Management Server. The Open Systems Management Server feature
key must be installed in order to enable the OSMS State.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config features OpenSysMS 1
featureKey
Specifies the key you have received to enable
optional software feature on a specific product.
A feature key is a string of case-sensitive,
alphanumeric ASCII characters.
The number of characters may vary in the
format; however, the key must be entered
exactly, including the hyphens. An example of a
feature key format is XxXx-XXxX-xxXX-xX.
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values are
enable and disable. Boolean 1 and 0 may be
substituted as values.