Filter
Top Products
9 • Maintaining and Updating
9 - 10 SV60861 Rev. F
This exposes the print-
head cover.
6. Grasp the printhead
cover and pu
ll as shown
here.
7. Grasp the printhead
stan
d-off and lift the
printhead up and out.
8. Discard the old print-
head.
9. Locate the new print-
head and remove the
protective cove
r.
10. Install the new printhead
in the p
rinthead slot.
11. Close the printhead
cover and pu
sh the print-
head latch back until you
hear it click into p
lace.
12. Close the main cover.
Printhead Cover
Printhead Standoff