Filter
Top Products
4 • Running Mail
4-34 SV60861 Rev. F
Adding
Postage or
Changing
th
e D
ate
If you do not have the correct postage or date on a piece of mail, you can
add more postage or change the date directly on a piece of mail. If you pre-
fer, you can print the corrections on at a tape instead and then apply it to
the piece of
mail.
Adding More Postage
1. If you are printing more postage on an envelope and if the envelope is
sealed, press the seal key and select Sealer Off. If you are printing on
a tape, go to step 3.
2. Turn the piece of mail around 180 degrees so that the meter stamp is in
the lower lef
t corner as shown here. Then, place the envelope on the
feed deck with the flap facing down.
3. To add more postage, press the Mode key and
select Key In Postage.
4. Enter the additional amount using the numeric keys and press Enter
.
Press the Start key. If you are printing a tape, press the Tape key. The
additional postage prints on the envelope as shown below.
5. If you print a tape, ap
ply the tape to the envelope below the existing
meter stamp.
8
0030
0030
0030
00 07
00 30