Filter
Top Products
DM800™, DM900™ Digital Mailing System Operating Guide
SV60861 Rev. F 9 - 11
Changing the
Wiper Blade
Assembly
When you change the printhead, you must also replace the wiper blade
assembly.
Instructions for replacing the wiper blade assembly are included with each
rep
lacement and are repeated here for your convenience.
1. From the IntelliLink® Control Center, press the Menu key
.
2.
Select Maintenance.
3.
Select Replace W
iper Blade Assembly.
The “Preparing Wiper Blade” screen appears. During this time, the sys-
tem moves the printhead assembly back so that you can access the
wiper blad
e assembly.
4. Lift the main cover and
locate the wiper blade
assembly
.
5.
Locate the small black
lever b
ehind and next to
the wiper assembly.
6. Push the lever to the
rear
of the machine to
release the wiper.
Wiper blade assembly