Filter
Top Products
5 • Mailing System Setup
5-4 SV60861 Rev. F
Setting the
Display
Langua
ge
Depending on the model of your mailing system, you may be able to set the
display to any of the following languages:
• English
• Espanol
To change the language of the display:
1. Press the Men
u
key.
2. Select Set Up, or press 1 and th
e Enter key.
3. Select Change Langu
age, or press 4 and the Enter key.
4. Select the language you want to appear in the display.
•Press 1 fo
r English.
•Press 2 fo
r Espanol.
5. Press the Enter key.
Adjusting
Display
Contrast
You can adjust the contrast of your display and set the volume (1D00 only)
of the speaker on your mailing system.
To adjust the contrast level of your display:
1. Press the Menu
Key.
2. Press the down arrow key and then select Adjust Display Co
ntrast, or
press ? and the Enter key
3. Use the left or right arrow keys on the control center to select the con-
trast (1 - 9) you want. The screen updates to the new setting.
4. Press the Enter key to save this se
tting.
Adjusting
the Feeder
Deck
Sens
or
The feeder deck sensitivity adjustments improve mail piece sensing capa-
bilities on DM800™, DM900™ mailing systems, eliminating the need to
press
down on the hopper mail stack to activate the feeder.
1. Press the Menu
Key.
2. Press the down arrow key and then select Adjust Feeder Deck
Senso
r.
• Press the right arrow key to view specific instructions about sensi-
tivity adjustments.
• Select Incre
ase by 1 to increase the sensitivity of the Hopper Sen-
sor.
• Select Decrease by
1 to decrease the sensitivity of the Hopper
Sensor.
• Select Return to Factory Defa
ult to set the Hopper Sensor to the
default setting.
3. Press the Enter when done.
1
2
3