Filter
Top Products
DM800™, DM900™ Digital Mailing System Operating Guide
SV60861 Rev. F 5-21
Defining Custom
Preset Values
Defining Custom Preset Values
When creating a custom preset, the mailing syste
m will prompt you to
select a class of mail if you are using Key In Postage Mode. Selecting a
class will ensure your preset values are updated automatically when post-
age rates change.
1. Enter the values for the mail job (for
example, the weighing mode, the
postage value, class and carrier etc.) that correspond to the values you
want to be able to call up in the future by selecting a custom preset key.
For example, you may want to define a set of conditions so that the
envelopes are sealed only (no postage applied).
2. Press the Custom Presets
key.
3. Press the right arrow key.
4. Select Store
Current Setting to Preset.
5. A list of presets, starting with “0 Normal” appears.
Select one of the pre-
sets that has not been defined yet. These presets are named “Avail-
able”. To change an existing preset, refer to Editing Custom Preset
Values in this section.
6. If you have selected Key in Postage mode, the system will prompt you
to choose a
class for the preset. Choosing a class will ensure your pre-
set values are automatically updated when postage rates change.
• Press the Select Class screen key
, then follow the prompts to
select a weighing and class options. The system will return to the
Main screen. Return to step 2 to set the Custom Preset.
OR
• Press the down arrow key to continue setting the custom preset
without selecting
a class.
7. The system prompts you to “Enter New Preset Na
me”. Type in the
name using the alphanumeric keys.
8. Press the Enter key
. The "View Preset" screen appears and displays all
of the values you defined in this session.
9. To use these values in the future, simply press the Custom Pre
sets
Key and select the screen key corresponding to this preset name.
10. Press the Enter key to return to
the main screen.
NOTE: You can elect to save the custom preset without a selecting a class, but
your preset values will not update automatically when postage rates change.
NOTE: Proceed as if you were actually running a job. Select the mode and
class and serv
ice etc. By doing this, you are entering the values that you will
use for the normal preset. Refer to Chapter 4, Running Mail in this guide for
more information on selecting mode and class.