Filter
Top Products
DM800™, DM900™ Digital Mailing System Operating Guide
SV60861 Rev. F 3-3
4. Set the sealer lever. Push lever
to the right for sealing or to the
left for postcards and mail you
do not want sealed.
5. Use the thickness adjustment
knob to adju
st for envelope
thickness.
• For thicker pieces of mail
(3/8” to 5/8”), or mail contain-
ing several inserts, use the
thick mail setting
. For most
mail under 3/8", use the nor-
mal mail settings.
• For large stacks of thin mail,
such as single inse
rts or post
cards, the thin mail setting
may be needed for better
performance. Refer to the
figure on the right.
To pick a setting, turn the knob to
the arrow lo
cated on the feed
cover.
6. Make sure you have sufficient funds in your postage meter. If the mes-
sage “Low Funds” appears on the screen, make sure you can complete
the mail run
with the funds you have. If you do not have enough funds,
see Chapter 6, Adding Postage in this guide.
Running the
Mail
1. Press the Mode key on the IntelliLink® Control Center.
2. Select Key In Post
age.
3. Key in the correct postage value using the numeric keys on the control
center, then
press Enter.
4. Place the piece of mail on the feed deck and press the Sta
rt key.
Sealer
Lever
Normal Mail Setting
Thick Mail
Setting
Thin Mail
Setting
NOTE: The “Auto-On” (DM900™ only) feature allows you to process mail with-
out pressing the Start key after you place mail on the feed deck. The
IntelliLink® Control Center will advise you of the mailing
stage you are in.