Filter
Top Products
Administrator’s Guide for ViewStation EX, ViewStation FX, and VS4000
5-2 www.polycom.com/videodocumentation
Using the Web Interface
You can use the web interface to perform most of the calling and configuration
tasks you can perform on the local system.
To configure your browser to use the web interface:
1. Be sure that your web browser uses one of these software versions:
• Microsoft Internet Explorer 5.5 or later.
• Netscape 6.0 or later.
2. Configure these settings:
To access the system using the web interface:
1. On a PC, open a web browser.
2. In the browser address line, enter the system’s IP address, for example,
http://255.255.255.255, to go to the system’s web interface.
3. Enter admin as the user name, and the admin password, if a password has
been established.
You can use the web interface to configure all of the system settings except the remote
management settings. For security reasons, these settings must be configured on the local
system by an administrator.
Internet
Explorer Netscape
Allow cookies Enabled Enabled
Force pages to reload on every visit to
a page
Enabled N/A
Set cache to compare page in cache
with page on network every time
N/A Enabled
Enable Javascript N/A Enabled