Filter
Top Products
Chapter 4 - Designing the User Experience
© Polycom, Inc. 4-13
Configuring Data Conferences and Streaming Calls
Configuring Data Conferences
ViewStation systems support data conferencing for:
❑ point-to-point ISDN calls, and
❑ multipoint calls using external H.320 bridges that support this feature.
You can configure your ViewStation system to work with other data conferencing
devices, such as ShowStation, WebStation, and StreamStation. You can also
configure the ViewStation system to work with Microsoft NetMeeting.
To configure a data conference:
1. Go to System Info > Admin Setup > Data Conference.
2. Enter the IP address of the data conferencing device, or the IP address of the
PC on which NetMeeting is running.
For detailed instructions on setting up NetMeeting for calls, please refer to the Getting
Started Guide for ViewStation EX, FX, and VS4000.
Configuring and Starting Streaming Calls
You can stream audio and video from one to many viewers with your ViewStation
system, both in and out of a call. Viewers watch your presentation or meeting, via
the system’s web interface, from their PC.
To configure a stream:
1. Go to System Info > Admin Setup > LAN/H.323 > Streaming.
2. Configure these settings:
Setting Description
Speed Specifies the speed used for the streaming call.
IP Multicast Address Specifies the multicast address used for the stream. The default
address is based on your system serial number but can be
changed, if required.