Filter
Top Products
Chapter 3 - Configuring Network Use
© Polycom, Inc. 3-27
Placing a Test Call
When you finish configuring the system, you may wish to place a call to test your
setup.
You can find a list of worldwide numbers that you can use to test your system at
www.polycom.com/videotest.
To place a test call:
1. Select Video Call from the main screen.
2. Enter the ISDN number, system name or IP address.
To enter text, press Keyboard to access the onscreen keyboard.
3. Enter a second ISDN number, if necessary.
4. Select the call type.
5. Select the call speed.
6. Press Call-Hang Up on the remote control.
If you have trouble making video calls:
❑ Make sure the number you dialed is correct, then try the call again. For
example, you may need to dial 9 for an outside line or include a long distance
access code or country code.
❑ To find out if the problem exists in your system, ask the person you were trying
to reach to call you instead.
❑ Find out if the system you are calling has its power turned on and is
functioning properly.
❑ If you can make calls but not receive them, make sure that your system is
configured with the correct number.