Filter
Top Products
© Polycom, Inc. 3-1
3
Configuring Network Use
This chapter lists the information you need to get your network ready for
videoconferencing. Once you’ve gathered that information, you can begin
configuring the system’s network options. Details on how to perform this
configuration are also included in this chapter.
When you power on your system for the first time, the setup wizard detects the
system’s IP and ISDN connections and leads you through the minimum
configuration steps required to place a call.
If you need to change any of these initial settings to accommodate your
organization’s environment, you can manually adjust them using the screens
described in this chapter.
Note that if you establish an administrator’s password during the setup wizard,
you will need to enter it each time you wish to change the Admin settings.
What’s in this Chapter? Page
Getting the Network Ready 3-2
Network Connectivity Checklist 3-2
Using the Setup Wizard 3-3
Configuring Video Call Preferences 3-4
Configuring IP Calling 3-5
Configuring ISDN Support 3-13
Configuring the Global Address Book 3-22
Placing a Test Call 3-27
Keeping your Software Current 3-28