Filter
Top Products
112
Chapter 4 Manual OS Installation
4.1 Creating Driver Disks
When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.
■ Preparation for Creating Driver Disks
You need floppy disks for driver disks. A floppy disk is necessary for each driver.
Driver disks are created using the ServerStart FloppyBuilder function. The FloppyBuilder function is
available in the following environments.
• Starting up the ServerStart system on a client computer (Recommended)
• Starting up the system from the ServerStart CD-ROM on the server
When creating driver disks the tools on a client computer, install ServerStart on the computer
beforehand. Install ServerStart according to "2.4 Preparation for Using ServerStart on a Client
Computer" (pg.52).
If a different version of ServerStart has been installed, uninstall it and install the proper version. For
details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (pg.54).
The FloppyBuilder function may not operate correctly if you start up ServerStart while ServerStart of a
different version is installed in the computer. Make sure to uninstall a different version of ServerStart.