Filter
Top Products
45
PRIMERGY RX300 S2 User’s Guide
2
Checking before OS Installation
2 Check the MAC address.
Start up the server from the network.
The MAC address is displayed as shown below.
The MAC address is required for remote installation. Write it down.
You can turn the power on from a client (via a LAN) by utilizing the Wakeup on LAN (WOL) function.
Refer to "5.5.5 Turning the Power On via a LAN" (pg.152).
Be sure to install ServerView to control the power supply via a LAN.
CLIENT MAC ADDR: XX XX XX XX XX XX