Filter
Top Products
203
PRIMERGY RX300 S2 User’s Guide
Installing Internal Options
7
7.6.2 Available Internal Hard Disk Units
■ Available Internal Hard Disk Units
Up to six internal hard disk units can be installed in 3.5-inch storage bays.
■ Contents of the Optional Internal Hard Disk Unit Package
Before installing internal hard disk units, refer to "Appendix B.3 Internal Hard Disk Unit Specifications"
(
pg.296) to check the contents of the optional package.
7.6.3 How to Install the Internal Hard Disk Unit
1 Turn off the server and peripheral devices, then unplug the power cables from
the server.
"1.4.3 Turning Off the Server" (pg.33)
2 Touch a metal part of the server to discharge static electricity.
3 Remove the dummy unit from the bay to accommodate an internal hard disk
unit.
A dummy unit is inserted into a bay not occupied by an internal hard disk unit.
Slowly pull the dummy unit out towards you with the latches pressed inward.
Be sure to keep the removed dummy units for later use.
table: List of available hard disks
Product name Model Overview
HDD U320 10K 73GB hot plug 1" PG-HDH71K 73.4GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
HDD U320 10K 147GB hot plug 1" PG-HDH41K 146.8GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
HDD U320 10K 300GB hot plug 1" PG-HDH31K 300GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
HDD U320 15K 73GB hot plug 1" PG-HDH75K 73.4GB, 15,000rpm, Ultra320 SCSI
1 inch, hot plug supported
Dummy unit
Press the tabs inward