Filter
Top Products
270
Chapter 9 Operation and Maintenance
■ Fails in Remote Installation
If remote installation fails, check the following.
● Checking Services
Check that the DHCP, PXE Service, and TFTP Service are running.
For checking procedures, refer to "3.4 Remote Installation" (
pg.87).
● Setting TFTP
To access TFTP Service, add a Guest account to the TFTP folder and set appropriate access rights.
For setting procedures, refer to "3.4 Remote Installation" (
pg.87).
● Checking Network Function Settings
The server must support network function (PXE).
For setting procedures, refer to "
● Performing Remote Installation" (pg.44) in "2.1.2 Hardware
Settings".
● Checking the MAC Address
Check that the current MAC address is the correct MAC address of the server.
For the MAC address checking procedure, refer to "
● Performing Remote Installation" (pg.44) in
"2.1.2 Hardware Settings".
● Checking LAN Cable Connection
Check that the LAN cable is connected to the LAN card corresponding to the specified MAC address
and that the LAN card is connected to the network.