Filter
Top Products
51
PRIMERGY RX300 S2 User’s Guide
2
Checking before OS Installation
2.3.6 Cautions for Manual Installation
■ Cautions for SCSI Array Controller
The onboard SCSI array controller must be configured before the OS is installed. To check the onboard
RAID card configuration, start up WebBIOS. For more details, refer to "PRIMERGY RX300 S2
Onboard SCSI RAID User's Guide".
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to "5.1 Memory Dump/Paging File Setting" (
pg.130).
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts.
For more details on background operations, refer to "PRIMERGY RX300 S2 Onboard SCSI RAID
User's Guide".