Toshiba e-Studio 350 All in One Printer User Manual


 
320 Printing Guide — Printing from UNIX
Example: The command to set the pure black mode is “lp –o pureblackgray=1 filename”.
PCL5e Specific Options
Some of the options only apply to plain text or PCL5e files.
— Text Wrapping
The following options control text wrapping when it reaches the right margin.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to specify wrapping is “lp –o wrap filename”.
— Left Margin
The left margin position can be specified with the following option.
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to set the left margin to five columns is “lp –o lm=5 filename”.
— Right Margin
The right margin position can be specified with the following option.
If the right margin is set to the left of the left margin or if it is set to a position wider than the log-
ical page it will be ignored. The right margin is specified in columns from the left margin. A
negative value will be ignored.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to set the right margin to fifty columns is “lp –o rm=50 filename”.
For e-STUDIO450 Series and e-STUDIO280 Series:
The “Pure Black and Pure Gray” option is not available for e-STUDIO450 Series and
e-STUDIO280 Series.
Option Value Alternate
Value
Description
wrap Enable automatic text wrapping.
nowrap Disable automatic text wrapping.
Option Value Alternate
Value
Description
lm=value Set the left margin to value columns.
Option Value Alternate
Value
Description
rm=value Set the right margin to value columns.