Filter
Top Products
2 Troubleshooting Procedures 2.14 Wireless LAN Troubleshooting
2-54 Satellite Pro M10 Series Maintenance Manual (960-431)
2.14 Wireless LAN Troubleshooting
This section describes how to determine if the computer's Wireless LAN is functioning properly.
Perform the steps below starting with Procedure 1 and continuing with the other procedure as
required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Make sure the wireless communication switch on the front side of the computer is turned on. If it
is not, slide the switch toward the right to turn it on.
The Wireless LAN Diagnostic test program is stored on the computer's diagnostic disk. This
program checks the Wireless LAN function. Insert the diagnostics disk in the external floppy
disk drive which is connected to a USB port of the computer, turn the computer on and run the
test. Refer to Chapter 3, Tests and Diagnostics, for details.
If an error occurs while executing the Wireless LAN diagnostics test, go to Procedure 2.