Filter
Top Products
4 Replacement Procedures 4.17 Cooling Fan
4-56 Satellite Pro M10 Series Maintenance Manual (960-431)
Installing the Cooling Fan
To install the cooling fan, follow the steps below and refer to Figures 4-37.
CAUTION: When you remove the cooling fan, wipe the grease off of the bottom of the
heat sink and top of the CPU. Apply new grease.
1. Seat the cooling fan and secure it with two M2.5×6 black flat-head screws.
2. Connect the cooling fan cable to PJ8770 on the system board.
3. Secure the cooling fan cable with one strip of tape.