4.18 RTC Battery 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-57
4.18 RTC Battery
WARNING: When it is necessary to replace the RTC battery, be sure to use genuine
batteries or replacement batteries authorized by TOSHIBA. Installing the wrong battery
could cause a battery explosion or other damage.
If the RTC battery is found abnormal, it must not be installed. Replace it with a new
battery, and dispose of the old one according to the local regulations.
Check for any of the following signs of damage:
1) Electrolyte leakage
• Corrosion (greenish color) on the battery connector or cable
• Corrosion on the computer's battery connector
• White powder on any part of the battery
• White powder in the battery tray
• Clear liquid on the battery
• Clear liquid in the battery tray
• Clear liquid on any board near the battery
2) Damage to the connection cable
3) Damage to the connector housing
If any powder or liquid is found in or around the battery tray, clean it. Be very careful not
to let any leaked material contact your eyes or mouth. Do not inhale fumes from leaked
material.
If leaked material contacts your skin, eyes or mouth, wash the affected area thoroughly
with clean water.