Filter
Top Products
4 Replacement Procedures 4.2 Memory Modules
4-14 Satellite Pro M10 Series Maintenance Manual (960-431)
Installing a Memory Module
To install a memory module, make sure that the computer is in boot mode and powered off,
follow the steps below and refer to Figures 4-4 and 4-5.
CAUTION: Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
1. Fit the memory module’s connectors into the computer’s connectors and press
carefully to ensure firm contact.
2. Gently, push the memory module down until latches on either side engage the
memory module to hold it in place.
3. Align two tabs on the edge of the memory slot cover with two notches on the
memory slot, and seat the memory slot cover.
4. Secure the memory slot cover with two M2.5×4 black flat-head screws.
CAUTION: Do not install a memory module in slot B only. Use slot A prior to slot B.
Otherwise, the computer or the memory may be damaged.