Filter
Top Products
4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-149
13. Connect the FPC to the connector on the source PCB.
Make sure the latch secures the connector correctly.
See the notches on both the edge of the FPC, and
see the contour of the connector.
Insert the FPC into the connector firmly. The FPC
must have no inclination. Lock the connector firmly.
NG: The FPC has inclination.
NG: The FPC does not connect firmly.
Screw
Pin*
Pin*
Screw
Screw
Tighten the screws with 0.9 kgf•cm of torque.
* Align the holes on the PCBs with the pins.
Gate PCB
Source PCB
Screw
Pin*
FPC
Do not let the PCB lie
on the rib of the frame.
Figure 4-121 Securing the PCBs and connecting the FPC