Filter
Top Products
4.32 TFT FL (Model 15.0 SXGA+ Samsung LTN150P3-L03) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-135
Installing the TFT FL (Model 15.0 SXGA+ Samsung LTN150P3-L03)
To install the TFT FL (Model 15.0 SXGA+ Samsung LTN150P3-L03), follow the steps
below and refer to Figures 4-96 to 4-104.
1. Seat the FL in its groove on the mold frame.
2. Route the HV cable through its guide.
3. Lay the lamp cover on the mold frame and secure it with two screws.
4. Lay five sheets on the back light assembly and secure them with two clips.
5. Seat the panel assembly on the back light assembly.
6. Seat the top chassis and secure it with nine hooks.
7. Secure the chassis with four screws.
8. Secure the PCB with two screws.
9. Apply the PCB cover and the aluminum tape to the module.