Filter
Top Products
4.14 Wireless LAN Mini PCI Card 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-47
4 s
4.14 Wireless LAN Mini PCI Card
Removing the Wireless LAN Mini PCI Card
To remove the wireless LAN Mini PCI card, make sure the computer is in boot mode and
powered off, follow the steps below and refer to Figure 4-31.
1. Remove one strip of tape securing the antenna coaxial cables.
2. Disconnect two antenna coaxial cables from the wireless LAN Mini PCI card
using an antenna coaxial cable disconnector.
3. Gently press out on the latches. One end of the wireless LAN Mini PCI card will
pop up.
4. Grasp the wireless LAN Mini PCI card and pull it out.
Latches
Antenna coaxial cable
Wireless LAN Mini PCI card
Figure 4-31 Removing the wireless LAN card
CAUTION: Do not touch the connectors on the wireless LAN Mini PCI card or on the
computer. Debris on the connectors may cause the card to malfunction or to get
damaged.